Benchmarking DPDK

Mon, 08 Jul 2019 21:22:37 +0200

My reference: https://software.intel.com/en-us/articles/set-up-open-vswitch-with-dpdk-on-ubuntu-server

So I got to play with the Data Plane Development Kit (DPDK) from Intel recently. I planned on replicating the PVP benchmark for my use-case. I set up the following environment:

Ubuntu 18.04 (bionic) host with:
- KVM
- QEMU
Debian 10 guest images downloaded from: https://cdimage.debian.org/cdimage/openstack/current/

A useful tool is numactl (use apt to install it). On my non-server system, I don’t have multiple socks and multiple cores per sock etc.

root@machine:~# numactl  -s
policy: default
preferred node: current
physcpubind: 2 3 4 5 6 7 
cpubind: 0 
nodebind: 0 
membind: 0

Setting up (OVS+DPDK)

First of all set install OVS-dpdk using apt

sudo apt-get install openvswitch-switch-dpdk 
sudo update-alternatives --set ovs-vswitchd /usr/lib/openvswitch-switch-dpdk/ovs-vswitchd-dpdk

Restart the systemd service: sudo systemctl restart openvswitch-switch.service

Hugepages will need to be set up. But we need to tell DPDK about that.

root@machine:~# cat /etc/dpdk/dpdk.conf
   ...
NR_1G_PAGES=4
   ...

Isolate some CPUs

Edit the value of GRUB_CMDLINE_LINUX_DEFAULT to:

GRUB_CMDLINE_LINUX_DEFAULT="default_hugepagesz=1G hugepagesz=1G hugepages=4 hugepagesz=2M hugepages=2048 iommu=pt intel_iommu=on isolcpus=0,1"

And run sudo update-grub.

this setting will not need to change afterwards. A reboot of the machine is required. See if the parameters got passed correctly by doing cat /proc/cmdline

Set up Hugepages

sudo mkdir -p /mnt/huge
sudo mkdir -p /mnt/huge_2mb
sudo mount -t hugetlbfs none /mnt/huge
sudo mount -t hugetlbfs none /mnt/huge_2mb -o pagesize=2MB
sudo mount -t hugetlbfs none /dev/hugepages

root@machine:~# grep HugePages_ /proc/meminfo 
HugePages_Total:       4
HugePages_Free:        1
HugePages_Rsvd:        0
HugePages_Surp:        0

Configure OVS-DPDK

The database needs to be set up only once (sudo ovs-vsctl --no-wait init)

sudo ovs-vsctl --no-wait set Open_vSwitch . other_config:dpdk-lcore-mask=0x03  # hopefully: cores, 0,1 
sudo ovs-vsctl --no-wait set Open_vSwitch . other_config:dpdk-socket-mem="1024"
sudo ovs-vsctl set Open_vSwitch . other_config:pmd-cpu-mask=0x0C # we have just one NUMA node

Create OVS-DPDK Bridge and Ports

dpdkvhostuser is a predefined type. vhost-user is understood by Qemu 2.2 and above.

sudo ovs-vsctl add-br br0 -- set bridge br0 datapath_type=netdev
sudo ovs-vsctl add-port br0 vhost-user1 -- set Interface vhost-user1 type=dpdkvhostuser
sudo ovs-vsctl add-port br0 vhost-user2 -- set Interface vhost-user2 type=dpdkvhostuser

root@machine:~# ovs-vsctl show
c3459670-39b8-43f7-bc57-569672ed79c6
    Bridge "br0"
        Port "br0"
            Interface "br0"
                type: internal
        Port "vhost-user2"
            Interface "vhost-user2"
                type: dpdkvhostuser
        Port "vhost-user1"
            Interface "vhost-user1"
                type: dpdkvhostuser
    ovs_version: "2.9.2"

Binding Devices to DPDK

We should check whether the NIC is compatible with DPDK first. The list on DPDK doesn’t seem to have been updated e.g. the documentation itself for newer versions states that the I210 is supported.

sudo modprobe vfio-pci
sudo dpdk-devbind --bind=vfio-pci eno1 # eno1 is the interface I want to bind to DPDK

dpdk-devbind --status can be used to check whether the NIC is now using the DPDK compatible driver.

root@machine:~# dpdk-devbind --status

Network devices using DPDK-compatible driver
============================================
0000:00:19.0 'Ethernet Connection I217-V 153b' drv=vfio-pci unused=e1000e

Network devices using kernel driver
===================================
0000:02:00.0 'Killer E220x Gigabit Ethernet Controller e091' if=enp2s0 drv=alx unused=vfio-pci *Active*

    ...

VMs Quick Start

Download Debian 10 (buster) and change the password for root using guestfish. (Debian was an arbitrary choice here.)

Add anything to the images at this point. I downloaded qperf with all it’s dependencies and added it:

PACKAGES="qperf iperf"
apt-get download $(apt-cache depends --recurse --no-recommends --no-suggests \
  --no-conflicts --no-breaks --no-replaces --no-enhances \
  --no-pre-depends ${PACKAGES} | grep "^\w")

virt-copy-in -a ./debian-10.0.0-openstack-amd64-2.qcow2  *.deb  /home/

openssl passwd -1 can be used to generate a password entry, and this can be added to the guest image using:

guestfish --rw --add ../debian-10.0.0-openstack-amd64.qcow2 --mount /dev/sda1:/ vi /etc/shadow

And make 2 copies of the debian-10.0.1-20190708-openstack-amd64.qcow2 file. We’ll use it as our hard drives for guests.

Some resources to read

File-sharing: https://www.linux-kvm.org/page/9p_virtio
OVS+KVM: https://docs.paloaltonetworks.com/vm-series/8-1/vm-series-deployment/set-up-the-vm-series-firewall-on-kvm/performance-tuning-of-the-vm-series-for-kvm/enable-open-vswitch-on-kvm.html#
Using testpmd to test DPDK Performance: https://software.intel.com/en-us/articles/testing-dpdk-performance-and-features-with-testpmd
Vhost/Virtio in DPDK: https://software.intel.com/en-us/articles/configuration-and-performance-of-vhost-virtio-in-data-plane-development-kit-dpdk

Launching the Guests

I launched the guests in two separate terminal windows (i.e., copy-paste instead of executing).

root@machine:~# cat ./launch-os.sh 
# Launch OS1
qemu-system-x86_64 -m 1024 -smp 4 -cpu host -hda ./debian-10.0.0-openstack-amd64.qcow2 -boot c -enable-kvm -no-reboot -net none -nographic -chardev socket,id=char1,path=/run/openvswitch/vhost-user1 -netdev type=vhost-user,id=mynet1,chardev=char1,vhostforce -device virtio-net-pci,mac=00:00:00:00:00:01,netdev=mynet1 -object memory-backend-file,id=mem,size=1G,mem-path=/dev/hugepages,share=on -numa node,memdev=mem -mem-prealloc

# Launch OS2
qemu-system-x86_64 -m 1024 -smp 4 -cpu host -hda ./debian-10.0.0-openstack-amd64-2.qcow2 -boot c -enable-kvm -no-reboot -net none -nographic -chardev socket,id=char2,path=/run/openvswitch/vhost-user2 -netdev type=vhost-user,id=mynet2,chardev=char2,vhostforce -device virtio-net-pci,mac=00:00:00:00:00:02,netdev=mynet2 -object memory-backend-file,id=mem,size=1G,mem-path=/dev/hugepages,share=on -numa node,memdev=mem -mem-prealloc -fsdev local,security_model=passthrough,id=fsdev0,path=/tmp/share -device virtio-9p-pci,id=fs0,fsdev=fsdev0,mount_tag=hostshare

Godspeed!

Dpdk on sysarcher/@ich_code